TOY CHEST

Materials needed

Sides

1sheet   4' x 8' x 1/4" red oak veneer plywood

   7" x 60" x 3/4"  maple hardwood

  7" x 60" x 3/4"   white oak hardwood

   24" x 5" x 3/4"  walnut hardwood

24" x 48" x 3/4"  melamine pressed board (bottom)

   For the Top

84" x 6"  x 3/4" maple

84" x 4" x 3/4" brazilian cherry

84" x 6" x 3/4" red oak 

Hardware

4  2" brass plated L brackets

4  3" corner braces

2  7" angle iron

2  4" hinges

2  chest cover gliders

1 bottle wood glue

Instructions:

First cut the eight legs from the maple, walnut and whiteoak so the legs are 24" high and 3" wide. 

Use thin strips of walnut and whiteoak between the maple to make the legs as shown.

Thanks to OMP who supplied me with the free hardwood!